
Our Products
- + Electromagnetic Flow Meters
- + Steam and Gas Flow Meters
- + Mass Flow Integrators
- + BTU Meters
- + Flow Indicating Totalisers
- + Level Switches
- + Other Instruments
Contact Us
MANAS MICROSYSTEMS PVT. LTD.
Works:EL-54, Electronic Zone, J - Block, MIDC, Bhosari,Pune - 411 026.
Tel.No.(020) 27127044 / 47 / 27127858.
Website: www.manasmicro.com
Email : mktg@manasmicro.com
REGD. OFFICE
Row house no. 5, Parvati Park, Sinhagad Road, Pune 411 030
New Launches
Full Bore Electromagnetic Flow Meter SROAT -2000 & SROAT 1000 A Plus
- Sizes ranging from DN 10 – DN 1000
- Wide choices of compatible electrodes, liners & Body materials
- Pulse & Isolated 4-20 mA output
- Empty tube detection possible
- Accuracy ±0.5% of actual flow rate
- 5000 / 10000 Number of readings can be logged
- Four Numbers of Keys for Parameter Programming
- Computer/Printer Interfacing with RS 232 port
- Empty Tube Detection and Indication
- Suitable to conductive liquids = 5 µs/cm
- Stored/Online data can be stored in excel format (applicable for SS-2000)
- Online data can be transferred by using GSM modem (applicable for SS-2000)

BTU meter for chiller application , SERIES : BTU-100L
- Based on calculations of thermal power & energy consumed through measurement of flow, temperature difference of inlet & outlet of the medium.
- 4-20 mA output proportional to power output.
- 16x2 LCD, 9 digits for total energy & 5 digits for instantaneous power.
- The engineering unit can be selected as either KW & KWHr or BTU/Hr & BTU.
- Communication port RS 232/485 is available with MODBUS RTU.
- Backup of totaliser on power failure in non volatile memory.
- Logging history can be viewed on the screen.
- Ingress Protection: IP65 Equivalent.

BTU Meter For heat transfer application, SERIES : HET-100L
- Suitable for Thermic fluids like HYTHERM 500, HYTHERM 600, DOWTHERM A, DOWTHERM T etc.
- Output in terms of 4-20mA which is proportional to Power obtained.
- Communication Port (supports MODBUS-RTU) & Data Logging facility.
- Password protection on all programming modes (except display mode) to avoid wrong programming by an unauthorized person.
- Display of 16 x 2 Big Characters LCD with BLUE Backlight.
- Buzzer indication for faults/Error with blinking LED (Programmable).
- Fault Conditions - Indicated by different Error Codes.
- Accuracy of ± 0.25 % of Full Scale.
- Ingress Protection: IP65 Equivalent.

Water mass flow computing unit - WMFT-100
- Suitable For boiler feed water with density compensation.
- Online Computation For density Reducing Errors in Measurement Due To Pressure & Temperature.
- Isolated 4-20mA D.C. output proportional to Flow Rate.
- Linear or Square Root operation.
- Availability of panel & Wall mounting.
- Serial Interface with Computer through MODBUS RTU Protocol.
- Two alarm settings are available and single alarm output is available.
- If Flow rate exceeds the set reference flow, the lower 4 digit Display for Flow rate blinks.
